EL2305L. Elid Lift Access Controller
RM 0.00
Quantity
EL2305L is the replacement for EL2205L Lift Access Controller and is designed for elevators. One relay contact is provided for each floor that the lift serves. Maximum size is up to 64 floors. EL2305L consists of 3 parts. The main controller and power supply are housed in a single metal cabinet. Reader is usually mounted at the lift operation panel, while floor selection board with associated relays is separately mounted in another cabinet. Communication between floor selection unit and main controller may be up to 1 KM. Programming can be done either directly by using the keypad at the controller panel or remotely via a PC.
- Storage capacity: Stores up to 9,000 user-IDs and 5,000 (extended) offline transactions
- Display and keypad: 2x20-character backlit LCD display and 16 -key keypad
- Reader type: Supports various types of reader such as Magnetic, Bar Code, Proximity, Mifare Contactless Smart Card reader and Biometric
- Caters for timers and time zones, limiting access and users to different times of the day
- Simple programming set-up with scroll-down menu within the controller
- Firmware can be updated in-circuit, through the serial download from the PC
- Equipped with a calendar clock chip to give an accurate date and time
- Battery back-up for internal data storage and time clock
- Communication interface: Multi-drop or RS485 or TCP/IP
Controller | |
Communication Interface | Multi-drop or RS485 or TCP/IP (requires additional LAN module) |
Output | 6 general purpose outputs |
Input | 2 sensor inputs |
Display | 2x20 Character LCD |
Keypad | 16-Key keypad |
Power Consumption | 12V/40 mA excluding readers/keypad |
Dimension | 302(H) x 334(W) x 86(D) mm |
Floor Selection Unit | |
Output | 16 points (EFD0016 with 1 x ES8A), 32 points (EFD0032 with 3 x ES8A) |
Interface Relay | 1 SPDT, 3A rating |
Dimension | 415(H) x 405(W) x 121(D) mm |