Cost Effective To maintain an IN-OUT access control system using fingerprint access, you no longer need to invest in two master terminals. Replace one with an R2c and reduce your cost significantly.
Small Size With a width and height of 4.2 cm and 13.5 cm respectively, the size of the R2c is ideal for most office environments.
Verification and Storage in Master or Controller A simple mechanism applied to R2c, all verifications and data storage are managed by a master terminal or controller.
Simple RS485 Connection The R2c is designed with the standard RS485 communication port, to ease connection with the FingerTec fingerprint terminals and controllers.
Flexible Installation Distance The installation distance between the master terminal and the R2c slave terminal can go as far as 10 meters with a standard 4-core shielded Belden cable.
Multiple Verifications Besides fingerprint verification, the R2c also offers RFID card verification. MiFARE card verification feature is also available upon request.
Seamlessly Pairs with FingerTec Terminals The R2c is specially designed to seamlessly pair with FingerTec fingerprint models, which include R2, AC900, Q2i, and iKiosk100 Plus*.*Selected models only
Access Control Management All EM Lock driving outputs, alarm outputs, and anti-passback via the R2c can be diverted to be managed by a master terminal or Ingressus Controller in an access control system.
LAYOUT PLAN
System Communication
for illustration only
SPECIFICATIONS
MODEL
R2c
SURFACE FINISHING
Acrylonitrile Butadiene Styrene (ABS)
TYPE OF SCANNER
Optical fingerprint scanner
MICROPROCESSOR
Managed by Master
MEMORY
ALGORITHM
Supports BioBridge VX 10.0
PRODUCT DIMENSION (L X W X H), mm
64 x 42 x 135
STORAGE
• Fingerprint templates
Storge in master terminal
• Transactions
ENROLLMENT & VERIFICATION
• Methods
Fingerprint (1:N) & card
• Recommended Fingerprint per user ID
Managed by master
• Fingerprint placement
Any angle
• Verification time (sec)
Managed by master
• FAR (%)
• FRR (%)
CARD TECHNOLOGY
• RFID: 64-bit, 125kHz
Yes
• MIFARE: MFIS50/S70, 13.56MHz
Made to order
COMMUNICATIONS
• Method
RS485 (Connects to Master Terminal)
OPERATING ENVIRONMENT
• Temperature (°C)
0 ~ 45
• Humidity (%)
20 ~ 80
• Power input
Managed by master
ACCESS CONTROL
• EM lock driving output
Managed by master
• Alarm output
• Anti passback
Cost Effective To maintain an IN-OUT access control system using fingerprint access, you no longer need to invest in two master terminals. Replace one with an R2c and reduce your cost significantly.
Small Size With a width and height of 4.2 cm and 13.5 cm respectively, the size of the R2c is ideal for most office environments.
Verification and Storage in Master or Controller A simple mechanism applied to R2c, all verifications and data storage are managed by a master terminal or controller.
Simple RS485 Connection The R2c is designed with the standard RS485 communication port, to ease connection with the FingerTec fingerprint terminals and controllers.
Flexible Installation Distance The installation distance between the master terminal and the R2c slave terminal can go as far as 10 meters with a standard 4-core shielded Belden cable.
Multiple Verifications Besides fingerprint verification, the R2c also offers RFID card verification. MiFARE card verification feature is also available upon request.
Seamlessly Pairs with FingerTec Terminals The R2c is specially designed to seamlessly pair with FingerTec fingerprint models, which include R2, AC900, Q2i, and iKiosk100 Plus*.*Selected models only
Access Control Management All EM Lock driving outputs, alarm outputs, and anti-passback via the R2c can be diverted to be managed by a master terminal or Ingressus Controller in an access control system.