W-912A.In-Wall PA Amplifier
RM 0.00
Quantity
| Type | In-Wall Mounting 6 Channel Mixer Power Amplifier |
|---|---|
| Output Power | 120W RMS |
| Power Bandwidth |
(D)20 to 20,000 Hz, 0.5% THD (T)50 to 20,000 Hz, 0.5% THD |
| Frequency Response |
(D) 30 to 20,000 Hz ±1 dB (T) 30 to 15,000 Hz ±1 dB (T) 30 to 20,000 Hz +1dB, -2 dB |
| Total Harmonic Distortion | 0.02% at 1 kHz, Rated Output |
| Inputs |
Six Input Ports ; 100mV / 10kohms Each port accepts any input module except T-01S. (Use T-01S only in port #5 or #6) One Bridging Input/Output ; 100mV / 3.3kohms |
| Outputs |
(T) 8 ohms, 25 V & 70 V, Balanced (D) 4 ohms, Unbalanced |
| Output Regulation (1kHz) |
(D) Less Than 0.5 dB, No Load to Full Load (T) Less Than 1.0 dB, No Load to Full Load |
| S/N Ratio |
(Band Pass : 20 to 20,000 Hz Controls OFF ; 90 dB Equalizer IN ; 88 dB Master Volume Max. ;77 dB Compressor IN ; 84 dB |
| Compression |
Attack Time ; No Greater Than 2msec. Compression Range ; 30 dB Release Time ; Variable 20msec. to 2 sec Distortion ; Less Than 1 % |
| Equalization |
9-band One-octave Graphic Equalizer Center Frequencies ; ISO 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16kHz Equalization Range ; ±12 dB |
| Filters |
High-pass Filter ; 180 Hz, 12 dB / octave Low-pass Filter ; 7kHz, 12 dB / octave |
| Indicators |
1 LED Power Indicator 1 LED Peak Indicator |
| Protection Circuitry |
Built-in with 2 AC Fuse (1 inside) and 1 Output Circuitry Output Circuitry Protection when Heatsink Temperature Overheats |
| Connectors |
Input #1 to #6 ; Card-edge Connector Output ; Screw-terminal strip Bridging Input/Output ; Screw-terminal Strip Mute ; Screw-terminal strip |
| Power Requirement | 120 V AC, 60 Hz |
| Power Consumption | 100 W |
| User's Space (Blank Panel) |
Size (WxHxD) ; 101.6 (4") x 60.3 (2.4") x 95.3 (3.8") mm Effective Space for Customizing Optional expanding kit WE-2 may be loaded. |
| Weight | 17.3 kg (38.14 lbs) ; Without Input Modules and Back Box |
| Color | Silver |
| Accessories | Volume Control Cover x 3 pcs |
| Associated Equipment |
Plug-in Modules for Input ; M-01S, U-01S, B-01S, L-01S, I-01S Plug-in Modules for Input with MUTE ; U-11S, U-12S, B-11S, L-11S, M-11S Plug-in Modules for Input with Remote Volume Control Facility ; M-21S, U-21S Plug-in Modules for Line Output ; T-01S Plug-in Modules for Tone Signal ; S-01S, S-02S, S-03S Volume Control Cover ; YA-910 Expanded Kit ; WE-2 |
