DA-500F-HL.Multichannel Power Amplifier
RM 0.00
Quantity
| Power Source | 220 - 240 V AC |
|---|---|
| Amplification System | Class D |
| Power Consumption |
460 W (based on EN standards) 2350 W (rated output 100 V line |
| Input |
4 circuits 10 kΩ XLR-3-31 type connector CH 1 mode ON/OFF switch (ON: CH 1 to All ch |
| Rated Output |
4 channels: 500 W × 4 (100 V line M4 screw terminal |
| Frequency Response | 50 Hz - 20 kHz (-3 dB |
| Total Harmonic Distortion |
0.1 % (1 kHz) 0.3 % (100 Hz - 20 kHz) |
| Protection Circuit |
Protection against excessive current flow due to overload unusual DC voltage output temperature rise at power amp. heat sink (100 ¡æ (212 ©bF) or more) temperature rise at power supply heat sink (80 ¡æ (176 ©bF) or more) |
| S/N Ratio | 100 dB (A-weighted) |
| Crosstalk | 70 dB (A-weighted) |
| Control/Monitor |
Control input: Power ON/OFF status of the individual channels photocoupler input Monitor output: Power ON/OFF status of the individual channels Protection status of the individual channels photocoupler open collector output control current: 12 mA or less Connector: RJ-45 connector × 2 Connection cable: Shielded Category 5 twisted pair cable for LAN (CAT5-STP) Maximum cable distance: 600 m (656.17 yd) |
| LED Indicator |
Power (blue) × 1 Protect (red) × 4 |
| Cooling | Forced air cooling |
| Operating Temperature | -10 ¡æ to +40 ¡æ (14 ©bF to 104 ©bF) |
| Operating Humidity | 90 %RH or less (no condensation) |
| Finish |
Panel: Aluminum Case: Plated steel sheet |
| Dimensions | 482 (W) × 88.4 (H) × 404.2 (D) mm (18.98 × 3.48" × 15.91) |
| Weight | 9 kg (19.84 lb) |
| Accessory |
Power cord (2 m (6.56 ft)) …1 Rack mounting screw (with washer) …4 |
| Option | Matching transformer: MT-251H |
