TOA DIGITAL PLAYBACK ANNOUNCER EV-350P L
RM 0.00
Quantity
- Specification
- * 0 dB = 1 V
| Power Source | 110 - 120 V AC, 50/60 Hz or 24 V DC 0.3 A |
|---|---|
| Power Consumption | 9 W |
| Output |
Outputs 1,2: 0 dB*, 600 Ω, unbalanced, phone jack, M3.5 screw terminal, distance between barriers: 8.2 mm Headphone output: 0 dB*, 100 Ω, unbalanced, phone jack |
| Input | AUX: -20 dB*, 10 kΩ, unbalanced, phone jack |
| Frequency Response |
20 - 20,000 Hz ±3 dB (44.1 kHz sampling) 20 - 14,000 Hz ±3 dB (32 kHz sampling) 50 - 20,000 Hz ±3 dB (44.1 kHz sampling, IT-450 mounted) 50 - 14,000 Hz ±3 dB (32 kHz sampling, IT-450 mounted) |
| Distortion | Under 0.3% (44.1 kHz, recording method: Extremely High) |
| No. of Mountable Memory Card | 2 (Ports A-B) (option) |
| Playback Mode | Single- and dual-source playback (changeable) |
| No. of Playback Program |
Direct control: 8 programs or Binary control: 256 programs 1 emergency message takes precedence over the above programs and is played back. |
| Control Input |
Activations 1-8, playback, pause 1, pause 2, emergency, clear: No-voltage make contact input, pulse make length: over 50 ms, open voltage: 30 V DC, short-circuit current: 10 mA, M3.5 screw terminal, distance between barriers: 8.2 mm RS-232C terminal: D-sub connector (9 pins, male) |
| Control Output |
Shorting outputs 1,2, Error: M3.5 screw terminal, distance between barriers: 8.2 mm, contact capacity: 30 V DC, 0.5 A |
| Operating Display | LCD with backlight (16 characters × 2) |
| Operating Temperature | 0℃ to +50℃ |
| Operating Humidity | Under 90%RH (must be free from dew condensation) |
| Finish |
Panel: Aluminum, black, 30% gloss, paint Case: Surface treated steel plate, black, 30% gloss |
| Dimensions | 482 (W) × 44 (H) × 315 (D) mm |
| Weight | 4 kg |
| Accessory |
Power cord……1, Unbalanced-phone plug cord (2 m)……2, Rubber foot……4, Rack mounting screw……4, Rack mounting washer……4, Rack mounting bracket (pre-fixed to the unit)……2 |
| Option | Memory card: EV-CF128M |
- [NOTE] Phone jack outputs 1 and 2 can be converted to balanced type using an optional IT-450 transformer.
